Renia Syntic TOTAL

FOR PROFESSIONAL USE ONLY

• Packaging: 1 Litre (0.85kg) tin can with built-in brush.

• Packaging: 90g tube

• Price is per 1 can or tube

• Stock located in Kilkenny, Ireland — fast delivery for Irish customers

Clear PUR-Adhesive for bonding PVC (Vinyl), transparent materials, leather, rubber, EVA, TR, felt, and cork. Automotive & Marine Trimming, Leathercraft & Upholstery, General Workshop Repairs. 100% Free of Toluene and MEK. Open time: 5-30 min.

Additives & accessories (Renia TDS / cans)

Thinner: Renia Schnellkleber-Verdünner (thinner for contact cements). For Colle de Cologne: not acetone. Renia Thinner for Contact Adhesives.
Cleaner: Renia R+L. Syntic TOTAL can: thin Syntic with R+L. Renia R+L Cleaner.
Hardener C: 5–10% by volume; mix before use. Improves heat, oil and chemical resistance (TDS: up to about 120 °C with hardener). Shortens open time; limited pot-life. Renia Hardener C.

Price range: €7.75 through €31.27 incl. VAT

Size

Clear

Secure checkout – payments processed by Stripe

SKU: N/A Categories: Adhesives, Contact Adhesives

Description
Additional information

RENIA – Syntic-TOTAL – Clear High-Performance PUR Vinyl-Cement

Renia Syntic-TOTAL is a crystal-clear, non-yellowing Polyurethane (PUR) contact adhesive developed by Renia GmbH. Unlike traditional polychloroprene (CR) cements, Syntic-TOTAL is engineered specifically for bonding soft & hard PVC (Vinyl), transparent materials, and technical synthetic fabrics.

It provides extraordinary resistance to plasticizer migration (stopping adhesive breakdown on soft vinyl) while maintaining a completely invisible, flexible bond line.

Key Highlights & Advantages:

Crystal-Clear & Non-Yellowing: Dries 100% transparent — leaves no yellow marks on light leathers, white vinyl, or see-through materials.
Extreme Plasticizer Resistance: The ultimate choice for vehicle dashboards, marine vinyl seats, and PVC trims where standard glues soften and fail over time.
Polyurethane (PUR) Base: Offers superior bonding power on modern automotive synthetics, nylon, Perbunan-N, and treated fabrics.
Self-Priming on Foam: Pre-coats and reinforces soft PUR seat foam directly without the need for a separate primer.
Cold Bonding or Heat Reactivation: Can be pressed cold (open time 5–30 min) or heat-reactivated using an IR lamp (80°C for 3 min) or heat gun.
100% Toluene & MEK Free: Safe, low-odour professional application for enclosed workshop environments.

Recommended Materials & Applications:

Automotive & Marine Trimming: Marine PVC upholstery, vinyl dashboard wrapping, boat canopies, clear PVC window foils, door cards, and PUR seat foam rebuilding.
Technical & Synthetic Fabrics: Artificial leather, nylon, Perbunan-N, coated canvas, and natural leather.
Footwear & Plastics: Soft/hard PVC, transparent soles, TR rubber (with Rehagol), EVA, felt, and cork.
General Workshop: Invisible bonding where amber contact adhesives cannot be used.

Material Preparation & Application Guide:

Surface Preparation: Sand all materials thoroughly and remove dust. Clean greasy surfaces with a solvent cleaner.

TR (Thermoplastic Rubber): Sand and apply Renia-Rehagol Primer; apply Syntic-TOTAL after 5 minutes.

PUR (Polyurethane Foam): Sand lightly, press with absorbent paper to remove moisture/oil. Apply a thin coat of Syntic-TOTAL directly to seal the foam (no separate PUR primer needed). Allow 10 minutes, then coat both sides normally.

Application: Apply an even coat to BOTH surfaces. Apply a second coat on porous materials if required.

Open Assembly Time:

• General Materials: 5 – 30 minutes

• TR Rubber: 3 – 15 minutes

• PVC / Vinyl: 10 – 45 minutes

• Quick drying: IR-Lamp (80°C for 3 minutes).

Pressure & Pressing:

Standard Pressure: 1 – 5 bar (15 – 60 psi) depending on material firmness.

Minimum Press Time: 1 bar = min. 60 seconds; 3 bar = min. 30 seconds. (Reduce pressure on soft foam to avoid crushing the cell structure).

Curing: Instant initial strength allows immediate edge trimming. Full chemical and thermal cure develops over 24–48 hours.

Technical Data:

Chemical Basis: Polyurethane (PUR), 100% Toluene & MEK Free
Appearance: Crystal-clear (Dries transparent)
Shelf Life: Minimum 12 months at 20°C
Thinner & Tool Cleaning: RENIA – R & L – Cleaner or standard Acetone

PRECAUTIONS & SAFETY:
FOR PROFESSIONAL USE ONLY. Flammable liquid and vapour. Use only in well-ventilated areas or under forced extraction. Keep away from heat, hot surfaces, sparks, open flames, and ignition sources. Avoid inhalation of vapours and contact with skin/eyes. Consult Safety Data Sheet (SDS) at ……. before use.

Weight	N/A
Size	1 L, 90 g

Renia Syntic TOTAL

Related products