Trim-Fix Spray Adhesive 500 ml — High Temperature Resistant (single can)

Trim-Fix (product no. ADHHT500) is a solvent-based, high-temperature spray adhesive in a 500 ml aerosol. Trimmers in Ireland use it for headliners and interior upholstery. It holds up to 110 °C, so it won’t let go when a car roof heats up in summer. Use it on headliner fabric, foam, fabric, carpet, door cards, seat repairs and leisure vehicles. Coat both surfaces, wait until the solvent evaporates, then press firmly. It is not recommended for PVC, vinyl or artificial leather, because the solvent can react with the plasticisers over time. Test on a hidden area first. The price is per can, and a pack of 12 is also available. It is in stock in Kilkenny and ships to Ireland and Northern Ireland only.

Frequently asked questions

Is Trim-Fix good for car headliners?
Yes. It is made for headliners, foam and fabric, and it is heat-resistant up to 110 °C.

Can I use Trim-Fix on vinyl or artificial leather?
It isn’t recommended. The solvent can react with plasticisers in PVC and vinyl. Test on a hidden area and check after a few days.

How do I apply it?
Shake the can well and coat both surfaces. Wait until the solvent evaporates, then press firmly.

Where do you deliver adhesives?
Adhesives ship to Ireland and Northern Ireland only. In-stock orders placed before 3pm are dispatched the same day.

FOR PROFESSIONAL USE ONLY

Trim-Fix™ adhesive aerosol (product no. ADHHT500) — 500 ml can of solvent-based, high-temperature spray adhesive for headliners and upholstery. Stock in Kilkenny. Price is per can. Also available as a pack of 12 cans.

• High-temperature resistant spray adhesive (up to 110 °C) for automotive upholstery and interior trim
• Headliners, foam, fabric, carpet, door cards, seat repairs, leisure vehicles
• Coat both surfaces, wait until solvent evaporates, press firmly
• Not recommended for PVC, vinyl or artificial leather (automotive or other plasticised vinyls). Over time the solvent can react with the plasticisers in these materials. If you must use it on a plasticised surface, test on a hidden area first and check the result after a few days.

How to use

1. Shake the can well. Surfaces must be clean, dry and free of dust, grease or loose material.
2. Spray an even coat on both surfaces. The fingertip-control actuator gives a steady pass with minimal overspray.
3. Wait until the solvent evaporates (up to about 10 minutes depending on conditions) and the film is tacky.
4. Bring the surfaces together and press firmly over the whole area for a secure bond.

Quick specs

Product	Trim-Fix™ adhesive aerosol
Product No.	ADHHT500
Pack	Single 500 ml can
Manufacturer	AFT Aerosols Ltd
Contents	500 ml per can
Colour	Amber / clear (adhesive)
Application	Aerosol spray, fingertip-control actuator
Open / flash-off	Allow solvent to evaporate (up to ~10 min — conditions vary)
Heat resistance	Up to 110 °C / 230 °F
Relative density	1.2 (adhesive only)
Suitable for	Fabrics, foam, genuine leather, wood, metal, rubber and most plastics
Not suitable for	PVC, vinyl and artificial leather (test first)
SDS	See download below (Rev 5.0, March 2025)

Safety

Extremely flammable aerosol (H222). Pressurised container: may burst if heated (H229). Suspected of causing cancer (H351). Causes skin irritation (H315) and serious eye irritation (H319). May cause drowsiness or dizziness (H336). Contains dichloromethane and methyl ethyl ketone. Protect from sunlight; do not expose to temperatures exceeding 50 °C. Do not pierce or burn, even after use. Do not spray on an open flame. Use only outdoors or in a well-ventilated area. Professional use only. Read the SDS before use.

Download SDS (PDF)

Shipping

UN1950 AEROSOLS, Class 2.1. Flammable. Limited quantity (LQ) rules may apply.

Flammable aerosol. Road delivery within Ireland and Northern Ireland. Contact us before shipping outside Ireland.