Renia ReGuMe

FOR PROFESSIONAL USE ONLY

• Packaging: 0.85 kg / 1 Litre can with built-in brush

• Price is per 1 Litre can (1000 ml)

• Stock located in Kilkenny, Ireland — fast delivery for Irish customers

Specialized high-strength contact cement engineered specifically for primerless bonding of raw & coated metals to rubber, leather, EVA, foam, and automotive upholstery. Exceptional vibration dampening, extreme peel strength, and 100% Free of Toluene and MEK. Open time: 5–30 min.

Additives & accessories (Renia TDS / cans)

Thinner: Renia Schnellkleber-Verdünner (thinner for contact cements). For Colle de Cologne: not acetone. Renia Thinner for Contact Adhesives.
Cleaner: Renia R+L. Syntic TOTAL can: thin Syntic with R+L. Renia R+L Cleaner.
Hardener: For Renia CR contact cements in this range, Hardener C is listed on the TDS for MULTI-Colle, Colle de Cologne, top-fit and Syntic TOTAL (5–10% vol). Do not assume Hardener C for ReGuMe unless Renia lists it.

€38.00 incl. VAT

Categories: Contact Adhesives, Adhesives

Description

RENIA – ReGuMet – Rubber-to-Metal Specialized Contact Cement

Renia ReGuMet is a specialized, German-engineered heavy-duty contact adhesive developed by Renia GmbH. It is engineered specifically for direct bonding between metal surfaces and flexible materials without requiring a separate metal primer.

Formulated 100% free of Toluene and MEK, ReGuMet delivers extreme peel strength, excellent shock and vibration resistance, and permanent elasticity under demanding mechanical stress.

Key Highlights & Advantages:

Primerless Metal Bonding (Ohne Primer): Bonds raw steel, aluminium, galvanized sheet metal, and coated metals directly to flexible materials without a separate metal etching primer.
Extreme Shear & Peel Strength: High-tensile bond line designed to withstand continuous pulling, mechanical vibration, and dynamic load stress.
Permanent Vibration Dampening: Cures to a tough, elastic polymer layer that absorbs road vibrations, chassis movement, and temperature expansion between dissimilar materials.
100% Toluene & MEK Free: Safer, lower-toxicity formulation developed for enclosed vehicle interiors and professional workshop spaces.
Cold Bonding or Heat Reactivation: Can be joined cold within its open assembly window or heat-reactivated using a hot air gun (70–80°C) or IR lamp for delayed assembly.
Hardener Compatible: Mixing with 5–10% Renia Hardener provides elevated resistance against extreme heat, moisture, fuel, oils, and harsh weather conditions.

Recommended Materials & Applications:

Automotive, Campervan & Marine Trimming: Bonding rubber seals, foam insulation, sound-deadening mats, leather, and carpet directly to vehicle body panels, steel pillars, bulkheads, and aluminium frames.
Machinery & Equipment: Direct mounting of rubber vibration dampers, wear plates, anti-slip rubber sheeting, and gaskets to metal enclosures.
Footwear & Orthopaedics: Bonding steel shanks, metal orthotic supports, and reinforcement plates to leather, EVA, and rubber outsoles.
General Workshop: Multi-material assemblies involving steel, aluminium, brass, dense rubber, genuine leather, EVA, PUR foam, and wood.

Material Preparation & Application Guide:

Surface Preparation:

• Metals (Steel / Aluminium): Sand or mechanically abrade the metal surface to remove oxidation, rust, or paint. Degrease thoroughly with a suitable solvent cleaner.

• Rubber / Leather / Foam: Sand surfaces to open pores and remove dust and loose fibres.

Application: Apply an even, thin coat of Renia ReGuMet to BOTH bonding surfaces. Apply a second coat to porous materials if required.

Open Assembly Time:

• General Working Window: 5 – 30 minutes (allow solvents to flash off until touch-dry).

• Quick Drying: Can be accelerated under an IR-Lamp (80°C for ~3 minutes).

Pressure & Pressing:

Standard Pressure: 1 – 5 bar (15 – 60 psi) depending on material firmness.

Minimum Press Time: 1 bar = min. 60 seconds; 3 bar = min. 15 seconds. (Ensure firm, uniform contact across metal edges with a hand roller or press).

Curing: Instant initial grab allows immediate mechanical handling and trimming. Full tensile strength and chemical cure develop continuously over 24–48 hours.

Technical Data:

Chemical Basis: Specialized Polychloroprene (CR), 100% Toluene & MEK Free
Specific Feature: Primerless metal bonding (Gummi-Metall ohne Primer)
Open Time: 5 – 30 minutes
Shelf Life: Minimum 12 months at 20°C in original sealed container
Thinner: RENIA – Schnellkleber-Verdünner (Do NOT use acetone as a thinner!)
Tool Cleaning: Clean equipment, pots, and brushes with RENIA – Schnellkleber-Verdünner or acetone

PRECAUTIONS & SAFETY:
FOR PROFESSIONAL USE ONLY. Flammable liquid and vapour. Use only in well-ventilated areas or under forced extraction. Keep away from heat, hot surfaces, sparks, open flames, and ignition sources. Avoid inhalation of vapours and contact with skin/eyes. Consult Safety Data Sheet (SDS) at ……. before use.

Renia ReGuMe

Related products